LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Cutaway 7.3 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 2584 (Automatic Transmission 5R110W (TORQSHIFT(R)) -- F450-F550 Super Duty) >> General Procedures >> Transmission Filler Tube >> Removal

Transmission Filler Tube: Removal

WARNING: This page is about a different car, the 2011 Ford F550 Super Duty and 2011 Ford F450 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transmission fluid level indicator.
    Fig 1: Locating Transmission Fluid Level Indicator
    G07482190Courtesy of FORD MOTOR CO.
  2. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING article.
  3. Remove the bolt and the transmission fluid level indicator tube.
    Fig 2: Locating Bolt And Transmission Fluid Level Indicator Tube
    G07482191Courtesy of FORD MOTOR CO.
  4. Remove and discard the transmission fluid filler tube O-ring.
Fig 3: Locating Transmission Fluid Filler Tube O-Ring
G07482192Courtesy of FORD MOTOR CO.