Special Tool(s)
WARNING: This page is about a different car, the 2011 Ford F550 Super Duty and 2011 Ford F450 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOLS
| Aligner, Clutch Spring Compressor 307-455 | |
| Compressor, Clutch Spring 307-015 (T65L-77515-A) | |
| Fixture Body, Coast Clutch 307-385 | |
| Fixture Handle, Coast Clutch 307-384 | |
| Handle 205-153 (T80T-4000-W) | |
| Handle, Torque Converter 307-091 (T81P-7902-C) | |
| Loading Fixture, Clutch 307-S383 | |
| Remover, Output Shaft Seal/Housing 307-460 | |
| Remover, Pilot Bearing 308-001 (T58L-101-B) | |
| Remover, Torque Converter Fluid Seal 307-309 (T94P-77001-BH) (used with 100-001) | |
| Remover, Transmission Extension Housing Seal 307-454 (used with 307-309) | |
| Remover, Transmission Fluid Pump 307-221 (T89T-70010-A) | |
| Retaining Ring Pliers 307-343 (T95P-77001-AHR) | |
| Retainer, Torque Converter 307-346 (T97T-7902-A) | |
| Roll Pin Set 211-S060 (T78P-3504-N) | |
| Slide Hammer 100-001 (T50T-100-A) | |
| Socket, Output Shaft Locknut 307-458 |