LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Cutaway 7.3 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 2584 (Automatic Transmission 5R110W (TORQSHIFT(R)) -- F450-F550 Super Duty) >> Diagnosis & Testing >> Pinpoint Tests - OSC Equipped Vehicle >> Special Tool(s)

Special Tool(s)

WARNING: This page is about a different car, the 2011 Ford F550 Super Duty and 2011 Ford F450 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOLS

G07482144
Fluke 77-IV Digital Multimeter FLU77-4 or equivalent
G07482145
Transmission Fluid Pressure Gauge 307-004 (T57L-77820-A)
G07482146
Vehicle Communication Module (VCM) and Integrated Diagnostic System (IDS) software with appropriate hardware, or equivalent scan tool
NOTE: If equipped, turn the Power Take-Off (PTO) unit off for correct test results. For a description of PTO  operation, refer to TRANSMISSION ELECTRONIC CONTROL SYSTEM  in this service information. The PCM self-test test is not accessible when the PTO  unit is in operation. Shift Solenoid Pressure Control B (SSPCB) is on when the PTO  is in operation.

When an electrical connector or solenoid body is disconnected, inspect the connector for terminal condition, corrosion and contamination. Also inspect the connector seal for damage. Clean, repair or install a new connector as required.