Clutch, Solenoid, Application Chart (I)
WARNING: This page is about a different car, the 2011 Ford F550 Super Duty and 2011 Ford F450 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The PTO may operate in any gear including PARK and NEUTRAL and does not require the overdrive OWC. The torque converter may engage in PARK or NEUTRAL with PTO engaged.
CLUTCH, SOLENOID, APPLICATION CHART (I)
| Selector Lever Position | Gear | Direct Clutch | SSPCD Direct Clutch (I) | Low Reverse Clutch | SSPCE Low Reverse Clutch (D) |
|---|---|---|---|---|---|
| Manual 3rd | 3 | - | LP/HA | - | LP/LA |
| Manual 2nd | 2 | - | LP/HA | A | HP/HA |
| Manual 1st | 1 | - | LP/HA | A | HP/HA |
| HP = High Pressure LP = Low Pressure HA = High Current LA = Low Current A = Applied (D) = Directly Proportional (I) = Inversely Proportional |
|||||