LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Cutaway 7.3 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 2581 (Engine Mechanical - 6.8L (3V) -- F450 & F550 Super Duty) >> In-Vehicle Repair >> Engine Oil Pressure (EOP) Switch >> Installation

Engine Oil Pressure (EOP) Switch: Installation

WARNING: This page is about a different car, the 2011 Ford F550 Super Duty and 2011 Ford F450 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the EOP  switch and tighten in 2 stages.
    • Stage 1: Tighten to 14 Nm (125 lb-in).
    • Stage 2: Tighten an additional 180 degrees.
  2. Connect the EOP  switch electrical connector.
scientia non olet · About LEMON Manuals