LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Cutaway 7.3 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 2544 (Turbocharger Cooling System -- F250-F550 Super Duty) >> Removal And Installation >> Turbocharger Actuator Cooler >> Removal

Turbocharger Actuator Cooler: Removal

WARNING: This page is about a different car, the 2010 Ford Pickup, 2010 Ford F550 Super Duty, 2010 Ford F450 Super Duty, and 2010 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain the fuel and turbocharger cooling system. For additional information, refer to FUEL AND TURBOCHARGER COOLING SYSTEM DRAINING, FILLING AND BLEEDING .
  2. Disconnect the turbocharger actuator cooler-to-radiator hose from the cooler.
  3. Disconnect the expansion tank-to-turbocharger actuator cooler hose from the cooler.
    4. NOTE: To allow access to the upper rear cooler bolt, it is necessary to loosen the turbocharger actuator bolts in order to lift the turbocharger actuator and cooler.
  4. Loosen the 3 turbocharger actuator bolts.
  5. Remove the 3 bolts and the turbocharger actuator cooler.
scientia non olet · About LEMON Manuals