LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Cutaway 7.3 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 2544 (Turbocharger Cooling System -- F250-F550 Super Duty) >> Diagnosis And Testing >> Fuel and Turbocharger Cooling System >> Inspection and Verification

Inspection and Verification

WARNING: This page is about a different car, the 2010 Ford Pickup, 2010 Ford F550 Super Duty, 2010 Ford F450 Super Duty, and 2010 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify the customer concern.
  2. Inspect the entire fuel cooling system for obvious signs of damage, using the following chart.
    VISUAL INSPECTION CHART

    Mechanical Electrical
    • Leaks or weeps at the following components:
      • Coolant expansion tank
      • Radiator
      • Coolant pump
      • Fuel cooler
      • Turbocharger actuator cooler
      • Hoses
    • Inoperative or damaged components:
      • Coolant pump
      • Wiring or connectors
  3. If the inspection reveals an obvious concern, repair it as necessary.
  4. If the concern(s) remain(s) after the inspection, for electrical concerns, refer to the INTRODUCTION - GASOLINE MODELS . For coolant loss concerns, refer to the COMPONENT TESTS .