LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Cutaway 7.3 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 2500 (Information Center - Instrumentation, Message Center And Warning Chimes -- F250-F550 Super Duty) >> Removal And Installation >> Message Center Switch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2010 Ford Pickup, 2010 Ford F550 Super Duty, 2010 Ford F450 Super Duty, and 2010 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the upper instrument panel center finish panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE .
  2. If equipped with column shift, apply the parking brake and place the selector level in one of the low ranges.
  3. Lower the steering wheel tilt adjustment to the lowest position.
  4. Pull the lower instrument panel steering column cover out to release the retaining clips and remove the cover.
  5. Remove the 4 screws and the Instrument Cluster (IC) finish panel.
    • Disconnect the electrical connectors.
  6. Press the retaining tabs and remove the message center switch.
  7. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals