LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Cutaway 7.3 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 2500 (Information Center - Instrumentation, Message Center And Warning Chimes -- F250-F550 Super Duty) >> Removal And Installation >> Instrument Cluster (IC) Lens >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2010 Ford Pickup, 2010 Ford F550 Super Duty, 2010 Ford F450 Super Duty, and 2010 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the Instrument Cluster (IC). For additional information, refer to INSTRUMENT CLUSTER (IC) .
  2. Remove the 2 IC  lens and mask screws.
  3. Release the 8 retaining tabs and remove the IC  lens and mask assembly.
    Fig 1: Locating Retaining Tabs And IC Lens
    G06763358Courtesy of FORD MOTOR CO.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals