Safety Belt Warning Chime
WARNING: This page is about a different car, the 2010 Ford Pickup, 2010 Ford F550 Super Duty, 2010 Ford F450 Super Duty, and 2010 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
The safety belt warning chime warns that the driver side safety belt is not fastened. The safety belt warning chime sounds when the driver safety belt is not fastened and the ignition lock cylinder is turned from the OFF/LOCK or ACC to the ON or START position.
The safety belt warning chime stops sounding when the safety belt is fastened, when the ignition switch is turned from the ON or START position to the OFF/LOCK or ACC position, or when the chime has sounded for approximately 6 seconds.
The safety belt warning chime inputs are:
- Ignition switch RUN/START status.
- Driver safety belt warning request communicated by the Restraints Control Module (RCM) to the IC through the HS-CAN .
- Driver safety belt warning chime request communicated by the RCM to the IC through the HS-CAN .