LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Cutaway 7.3 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 2500 (Information Center - Instrumentation, Message Center And Warning Chimes -- F250-F550 Super Duty) >> Diagnosis And Testing >> Instrumentation, Message Center and Warning Chimes >> Principles of Operation >> Instrument Cluster (IC) >> IC Configuration

IC Configuration

WARNING: This page is about a different car, the 2010 Ford Pickup, 2010 Ford F550 Super Duty, 2010 Ford F450 Super Duty, and 2010 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

The IC  contains items that are configurable. Configurable items include customer preference items, which can also be set with a scan tool. The remaining configurable items can only be set by the Programmable Module Installation (PMI) procedure or by using As-Built data. Refer to MODULE CONFIGURATION .

NOTE: When installing a new IC  , it is necessary to upload the module configuration to the scan tool. Following installation of the IC  , download the module configuration from the scan tool into the new IC  . Refer to MODULE CONFIGURATION to carry out PMI  . It is also necessary to carry out a parameter reset procedure whenever a new IC  or PCM is installed. Refer to ANTI-THEFT - PASSIVE ANTI-THEFT SYSTEM (PATS) .

The configurable IC  items are as follows:

scientia non olet · About LEMON Manuals