LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Cutaway 7.3 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 2500 (Information Center - Instrumentation, Message Center And Warning Chimes -- F250-F550 Super Duty) >> Diagnosis And Testing >> Instrumentation, Message Center and Warning Chimes >> Principles of Operation >> Information And Message Center

Information And Message Center

WARNING: This page is about a different car, the 2010 Ford Pickup, 2010 Ford F550 Super Duty, 2010 Ford F450 Super Duty, and 2010 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

The message center is an integral part of the IC  that receives and acts upon much of the same information that is input and used to operate the IC  gauges, indicators, warning indicators and message center indicators. The message center, located in the center of the IC  is a 2-line display. The message center electronic functions use both hardwired, and the Controller Area Network (CAN) circuitry to transmit and receive information.

Whenever conditions are present that require a warning message, the message center replaces the last selected display with the new warning display. Once the message is reset or cleared, the message center returns to the last selected display. If multiple warnings are present, the message center displays each warning for approximately 4 seconds. Warning messages are also generally associated with other observable IC  indications. For example, when the LH front door is opened, the message center displays the message DRIVER FRONT DOOR AJAR along with the door ajar message center warning indicator. This allows the message center to be a more informative supplement to the IC  gauges and indicators.