Steering Column Switches: Notes

WARNING: This page is about a different car, the 2010 Ford Pickup, 2010 Ford F550 Super Duty, 2010 Ford F450 Super Duty, and 2010 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

The steering column switches consist of the following:

Multifunction switch
Ignition switch

The steering column switches receive driver inputs and send signals to various components. The multifunction switch controls the windshield wipers, hazard flasher, turn signal, headlamp low/high beam and headlamp dimmer/flash-to-pass. The ignition switch is used in conjunction with the lock cylinder key to start the vehicle. When the lock cylinder key is switched to different positions, it moves linkages which enable the ignition switch to send battery voltage to various components.