LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Cutaway 7.3 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 2494 (Rear Drive Axle/Differential - DANA 80 -- F350 Super Duty) >> In-Vehicle Repair >> Drive Pinion Flange and Drive Pinion Seal >> Special Tool(s)

Special Tool(s)

WARNING: This page is about a different car, the 2010 Ford Pickup and 2010 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOLS DESCRIPTION CHART

G06384505Courtesy of FORD MOTOR CO.
 2 Jaw Puller
205-D072 (D97T-4221-A) or equivalent
G06384506Courtesy of FORD MOTOR CO.
 Holding Fixture, Drive Pinion Flange
205-126 (T78P-4851-A)
G06776581Courtesy of FORD MOTOR CO.
 Installer, Drive Pinion Flange
205-285 (T88T-4851-A)
G06384508Courtesy of FORD MOTOR CO.
 Installer, Drive Pinion Oil Seal
205-208 (T83T-4676-A)
G06594657Courtesy of FORD MOTOR CO.
 Remover, Bushing
307-001 (TOOL-1175-AC)
G06594658Courtesy of FORD MOTOR CO.
 Slide Hammer
100-001 (T50T-100-A)
scientia non olet · About LEMON Manuals