LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Cutaway 7.3 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 2471 (Engine Mechanical - 6.4L 99R Diesel -- F250-F550 Super Duty) >> In-Vehicle Repair >> Rocker Arm >> Removal

Rocker Arm: Removal

WARNING: This page is about a different car, the 2010 Ford Pickup, 2010 Ford F550 Super Duty, 2010 Ford F450 Super Duty, and 2010 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the fuel rail. For additional information, refer to FUEL RAIL REMOVAL .
    2. NOTE: Mark the location of the rocker arm assemblies prior to removing.
  2. Remove the bolts and the rocker arm assemblies as needed.
    3. NOTE: Mark the location of the valve bridges before removing.
  3. Remove the valve bridges.
    • Inspect the valve bridges for wear or damage and replace as needed.
    4. NOTE: To prevent engine damage, keep the push rods in the order in which they were removed. Install all push rods back in their original positions.
  4. Mark the location and remove the push rods.
  5. Clean and inspect the rocker arm assemblies. For additional information, refer to ROCKER ARM CLEANING AND INSPECTION .
  6. Clean and inspect the push rods. For additional information, refer to PUSH ROD CLEANING AND INSPECTION .
scientia non olet · About LEMON Manuals