LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Cutaway 7.3 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 2471 (Engine Mechanical - 6.4L 99R Diesel -- F250-F550 Super Duty) >> In-Vehicle Repair >> Oil Pressure Regulator >> Removal

Oil Pressure Regulator: Removal

WARNING: This page is about a different car, the 2010 Ford Pickup, 2010 Ford F550 Super Duty, 2010 Ford F450 Super Duty, and 2010 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
  2. Remove the oil pressure regulator plug, spring and valve from the oil pump.
    • Remove and discard the O-ring seal.
    • Inspect the oil pressure regulator components and bore for wear. Install new components as necessary.
scientia non olet · About LEMON Manuals