Park System: Installation

WARNING: This page is about a different car, the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, and 2003 Ford Excursion. However, it is still accessible from the selected car via links, so may be relevant.

Install the park pawl shaft.
1. Install the park pawl shaft.
2. Install the park pawl.
3. Install the park pawl return spring.
  
  Fig 1: Installing Park Pawl Shaft
  Courtesy of FORD MOTOR CO.
Install the parking rod guide plate.
1. Install the parking rod guide plate.
2. Install the bolts.
  
  Fig 2: Installing Parking Rod Guide Plate
  Courtesy of FORD MOTOR CO.
Install the extension housing gasket and the extension housing.