Torque Converter

WARNING: This page is about a different car, the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, and 2003 Ford Excursion. However, it is still accessible from the selected car via links, so may be relevant.

The torque converter must be replaced if one or more of the following statements are true:
- A torque converter malfunction has been determined based on the complete diagnostic procedures.
- Converter stud(s), impeller hub or bushing is damaged.
- Discoloration of the torque converter (due to overheating).
- The torque converter is found to be out of specification when carrying out one of the following torque converter checks:
  - One-Way Clutch Check
  - End Play Check
  - Stator to Turbine Interference Check
  - Stator to Impeller Interference Check
  - Torque Converter Leak Check
- Evidence of transmission assembly or fluid contamination due to the following transmission or converter failure modes:
  - Major metallic failure
  - Multiple clutches or clutch plate failures
  - Sufficient component wear which results in metallic contamination
Fig 1: Cut Away View Of Torque Converter
Courtesy of FORD MOTOR CO.