Torque Converter Flushing
WARNING: This page is about a different car, the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, and 2003 Ford Excursion. However, it is still accessible from the selected car via links, so may be relevant.
- Following the instructions included with a suitable torque converter/transmission fluid cooler cleaner, flush the torque converter.
- After flushing, drain the remainder of the solvent through the converter drain plug.
- Add 1.9 liter (2 qt.) of clean automatic transmission fluid into the converter fluid filler tube and agitate by hand.
- Thoroughly drain the solution.
CAUTION:
Mineral spirits used to clean the torque converter must be fresh, non-chlorinated and non-halogenated.