LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Cutaway 7.3 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 216 (Automatic Transmission - Overhaul - 4R100 - Excursion & F250-F550 Super Duty) >> Disassembly & Assembly Of Subassemblies >> Reverse Planet Assembly >> Disassembly

Reverse Planet Assembly: Disassembly

WARNING: This page is about a different car, the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, and 2003 Ford Excursion. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Individual parts of the planet assemblies are not repairable.
  1. Remove the No. 11 rear reverse planet thrust washer.
    Fig 1: Removing No. 11 Rear Reverse Planet Thrust Washer
    G01557355Courtesy of FORD MOTOR CO.
  2. Remove the No. 10B front reverse planet thrust washer.
    • The pins and shafts in the planet assemblies should be checked for loose fit/damage. Use a new planet assembly if either condition exists.
    • Inspect the pinion gears for damaged or excessively worn teeth.
    • Check for free rotation of the pinion gears.
    • Check for damage in the overdrive planet assembly.
    Fig 2: Removing No. 10B Front Reverse Planet Thrust Washer
    G01557356Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals