LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Cutaway 7.3 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 216 (Automatic Transmission - Overhaul - 4R100 - Excursion & F250-F550 Super Duty) >> Disassembly & Assembly Of Subassemblies >> Output Shaft - Check >> Assembly

Output Shaft - Check: Assembly

WARNING: This page is about a different car, the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, and 2003 Ford Excursion. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: If any damage is found to the output shaft drive sprocket speed sensor wheel, a new output shaft drive sprocket speed sensor wheel will need to be installed.
    Fig 1: Installing Park Gear
    G01557348Courtesy of FORD MOTOR CO.
  1. If removed, use the arbor press and the Bearing Tube Remover/Installer (308-025) to install the park gear, press the park gear onto the output shaft until it stops at the shoulder on the output shaft.
  2. If removed, install the output shaft drive sprocket speed sensor wheel using the Output Shaft Speed Sensor Spacer (307-388).
    Fig 2: Installing Output Shaft Drive Sprocket Speed Sensor Wheel
    G01557349Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals