LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Cutaway 7.3 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 216 (Automatic Transmission - Overhaul - 4R100 - Excursion & F250-F550 Super Duty) >> Disassembly & Assembly Of Subassemblies >> Center Support >> Disassembly

Center Support: Disassembly

WARNING: This page is about a different car, the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, and 2003 Ford Excursion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove and discard the direct clutch seal rings.
    Fig 1: Removing Direct Clutch Seal Rings
    G01557286Courtesy of FORD MOTOR CO.
  2. Inspect the following for contamination or damage. Clean or install as necessary.
    1. Inspect the ball bearing.
    2. Inspect the feedbolt threads.
    3. Remove and inspect the No. 6 center support thrust washer.
    4. Inspect the inner hub diameter.
    5. Inspect the outer hub diameter.
    6. Inspect the seal ring grooves.
    Fig 2: Inspecting Direct Clutch
    G01557287Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals