Section 216 (Automatic Transmission - Overhaul - 4R100 - Excursion & F250-F550 Super Duty): Assembly: Transmission: Notes

WARNING: This page is about a different car, the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, and 2003 Ford Excursion. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Special Tools (1 Of 2)

Courtesy of FORD MOTOR CO.

Fig 2: Identifying Special Tools (2 Of 2)

Courtesy of FORD MOTOR CO.

Fig 3: Fluid Specification

Courtesy of FORD MOTOR CO.

NOTE: Soak all friction clutch plates in clean automatic transmission fluid.

NOTE: Prior to installation, lightly lubricate all O-ring seals with clean automatic transmission fluid.

NOTE: Lightly lubricate all thrust washers with petroleum jelly to hold them in place during assembly.