LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Cutaway 7.3 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 2124 (Rear Drive Axle/Differential - DANA 80 -- F350 Super Duty) >> In-Vehicle Servicing >> Differential Ring And Pinion >> Notes

Differential Ring And Pinion: Notes

WARNING: This page is about a different car, the 2008 Ford Pickup and 2008 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools

Illustration Tool Name Tool Number
GF0000814Courtesy of FORD MOTOR CO.
2-Jaw Puller 205-D072 (D97L-4221-A) or equivalent
GF0003131Courtesy of FORD MOTOR CO.
Adapter for 205-S156 205-159 (T80T-4020-F42)
GF0003078Courtesy of FORD MOTOR CO.
Adapter for 205-S156 205-160 (T80T-4020-F43)
GF0000827Courtesy of FORD MOTOR CO.
Alignment Adapter 205-D028 (D80T-4020-R60) or equivalent
GF0006304Courtesy of FORD MOTOR CO.
Collets, Differential Carrier Bearing 205-430 (Part of 205-S419)
GF0006324Courtesy of FORD MOTOR CO.
Depth Gauge/Aligner, Drive Pinion 205-280 (T88T-4020-A)
GF0006325Courtesy of FORD MOTOR CO.
Depth Gauge/Aligner, Drive Pinion (Handle) 205-281 (T88T-4020-B)
GF0000024Courtesy of FORD MOTOR CO.
Dial Indicator Gauge with Holding Fixture 100-002 (TOOL-4201-C)
GF0000025Courtesy of FORD MOTOR CO.
Dial Indicator Gauge with Holding Fixture 100-D002 (D78P-4201-B) or equivalent
GF0006326Courtesy of FORD MOTOR CO.
Draw Bar, Rear Axle 205-098 (T75T-1176-A)
GF0000771Courtesy of FORD MOTOR CO.
Gauge, Clutch Housing 308-021 (T75L-4201-A)
GF0000830Courtesy of FORD MOTOR CO.
Gauge Tube 205-D038 (D81T-4020-F51) or equivalent
GF0006327Courtesy of FORD MOTOR CO.
Handle 205-D055 (D81L-4000-A) or equivalent
GF0000772Courtesy of FORD MOTOR CO.
Holding Fixture, Drive Pinion Flange 205-126 (T78P-4851-A)
GF0003251Courtesy of FORD MOTOR CO.
Installer, Differential Carrier Bearing 205-D044 (D81T-4221-A) or equivalent
GF0001189Courtesy of FORD MOTOR CO.
Installer, Drive Pinion Bearing 205-488
GF0006328Courtesy of FORD MOTOR CO.
Installer, Drive Pinion Bearing Cup 205-024 (T67P-4616-A)
GF0001211Courtesy of FORD MOTOR CO.
Installer, Drive Pinion Bearing Cup 205-486
GF0006300Courtesy of FORD MOTOR CO.
Installer, Drive Pinion Flange 205-285 (T88T-4851-A)
GF0000815Courtesy of FORD MOTOR CO.
Installer, Drive Pinion Oil Seal 205-208 (T83T-4676-A)
GF0000832Courtesy of FORD MOTOR CO.
Plate, Bearing/Oil Seal 205-090 (T75L-1165-B)
GF0003255Courtesy of FORD MOTOR CO.
Protector, Drive Pinion Thread 205-487
GF0003880Courtesy of FORD MOTOR CO.
Removal Screw, Bearing Tube 308-092 (T84T-7025-B)
GF0006301Courtesy of FORD MOTOR CO.
Remover, Bushing 307-001 (TOOL-1175-AC)
GF0006329Courtesy of FORD MOTOR CO.
Remover, Rear Wheel Hub Bearing Cup 205-283 (T88T-4628-A)
GF0006330Courtesy of FORD MOTOR CO.
Remover, Drive Pinion Inner Bearing 205-489
GF0001069Courtesy of FORD MOTOR CO.
Remover/Installer, Bearing Tube 308-052 (T77J-7025-B)
GF0006305Courtesy of FORD MOTOR CO.
Retaining Ring, Differential Carrier Bearing 205-431 (Part of 205-S419)
GF0006306Courtesy of FORD MOTOR CO.
Set, Dummy Bearing 205-D048 (D81T-4222-ER) or equivalent
GF0004054Courtesy of FORD MOTOR CO.
Slide Hammer 100-001 (T50T-100-A)
GF0003212Courtesy of FORD MOTOR CO.
Spreader, Differential Carrier 205-001 (TOOL-4000-E)
GF0000822Courtesy of FORD MOTOR CO.
Step Plate, Differential Carrier Bearing 205-432 (Part of 205-S419)
Material

Item Specification
Clear Silicone Rubber
TA-32
ESB-M4G92-A
SAE 75W-90 Premium Synthetic Transaxle Lubricant
XT-75W90-QGT
GL-5
Threadlock and Sealer
TA-25
WSK-M2G351-A5