Torque Specifications
WARNING: This page is about a different car, the 2008 Ford Pickup, 2008 Ford F550 Super Duty, 2008 Ford F450 Super Duty, and 2008 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| A/C compressor bolts | 25 | 18 | - |
| A/C compressor nuts | 20 | 15 | - |
| Accessory drive belt idler pulley bolt | 25 | 18 | - |
| Accessory drive belt tensioner bolt | 25 | 18 | - |
| Balance shaft bearing cap bolts and studsa | - | - | - |
| Camshaft bearing cap boltsa | - | - | - |
| Camshaft position (CMP) sensor bolt | 10 | - | 89 |
| Camshaft sprocket bolta | - | - | - |
| Connecting rod boltsa | - | - | - |
| Coolant pump bolts | 25 | 18 | - |
| Coolant pump pulley bolts | 25 | 18 | - |
| Coolant tube stud bolt | 10 | - | 89 |
| Cooling fan clutch hub-to-cooalnt pump nut | 133 | 98 | - |
| Crankshaft damper pulley bolta | - | - | - |
| Crankshaft main bearing bolts (cross-mounted)a | - | - | - |
| Crankshaft main bearing bolts (vertical)a | - | - | - |
| Crankshaft position (CKP) sensor bolt | 10 | - | 89 |
| Crankshaft rear seal retainer plate boltsa | - | - | - |
| Cylinder block drain plug | 24 | 18 | - |
| Cylinder head boltsa | - | - | - |
| Cylinder head temperature sensor (CHT) | 26 | 19 | - |
| Engine coolant crossover assembly bolts | 10 | - | 89 |
| Engine front cover boltsa | - | - | - |
| Engine oil pressure (EOP) switch | 18 | 13 | - |
| Engine support insulator bracket boltsa | - | - | - |
| Engine support insulator-to-crossmember nuts - RH | 115 | 85 | - |
| Engine support insulator-to-crossmember nuts - LH | 200 | 148 | - |
| Engine support insulator through bolt | 350 | 258 | - |
| Engine wiring harness ground strap nut | 10 | - | 89 |
| Exhaust manifold flange nuts | 40 | 30 | - |
| Exhaust manifold heat shield bolts | 14 | 10 | - |
| Exhaust manifold nutsa | - | - | - |
| Exhaust manifold-to-cylinder head studs | 12 | 9 | - |
| Exhaust Y-pipe flange nuts | 40 | 30 | - |
| Flexplate boltsa | - | - | - |
| Flexplate inspection cover bolts | 34 | 25 | - |
| Flywheel boltsa | - | - | - |
| Front oil level indicator tube bolt | 25 | 18 | - |
| Fuel rail bolts | 10 | - | 89 |
| Generator upper mounting bracket bolts | 10 | - | 89 |
| Generator lower mounting bolts | 25 | 18 | - |
| Ground strap stud bolt | 10 | - | 89 |
| Ignition coil bolt | 6 | - | 53 |
| Intake manifold boltsa | - | - | - |
| Knock sensor (KS) | 20 | 15 | - |
| Oil cooler | 58 | 43 | - |
| Oil filter | 16 | 12 | - |
| Oil filter adapter bolts | 25 | 18 | - |
| Oil filter adapter nut | 48 | 35 | - |
| Oil pan boltsa | - | - | - |
| Oil pan drain plug | 14 | 10 | - |
| Oil pump bolts | 10 | - | 89 |
| Oil pump screen and pickup tube-to-oil pump bolts | 10 | - | 89 |
| Oil pump screen and pickup tube spacer | 25 | 18 | - |
| Oil pump screen and pickup tube-to-spacer bolt | 25 | 18 | - |
| Power steering pump bolts | 25 | 18 | - |
| Radio ignition interference capacitor nut | 10 | - | 89 |
| Rear oil level indicator tube bolt | 10 | - | 89 |
| Spark plugs (early build - black coil boot) | 34 | 25 | - |
| Spark plugs (late build - brown coil boot) | 12 | 9 | - |
| Suction accumulator upper and lower nuts | 7 | - | 62 |
| Throttle body (TB) spacer-to-intake manifold boltsa | - | - | - |
| TB boltsa | - | - | - |
| Timing chain guide bolts | 10 | - | 89 |
| Timing chain hydraulic tensioner bolts | 25 | 18 | - |
| Torque converter-to-flexplate nuts | 35 | 26 | - |
| Transmission auxiliary fluid cooler tube support bracket and the starter wiring harness support bracket nut | 25 | 18 | - |
| Transmission auxiliary fluid cooler support bracket bolts (early build vehicles) | 35 | 26 | - |
| Transmission fluid filler/level indicator tube bolt | 10 | - | 89 |
| Transmission mount-to-crossmember nuts | 115 | 85 | - |
| Transmission-to-engine bolts | 48 | 35 | - |
| Transmission wiring harness support bracket bolt | 10 | - | 89 |
| Valve cover boltsa | 10 | - | 89 |
a Refer to the procedure.