Clutch Disc Check

WARNING: This page is about a different car, the 2008 Ford Pickup, 2008 Ford F550 Super Duty, 2008 Ford F450 Super Duty, and 2008 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Using a suitable slide caliper, measure the depth to the rivet heads.
- Install a new clutch disc if the measurement is less than the specification.

Fig 1: Measuring Depth To Rivet Heads

Courtesy of FORD MOTOR CO.

Using a suitable dial indicator, measure the clutch disc runout.
- Install a new clutch disc if the measurement is greater than the specification.

Fig 2: Measuring Clutch Disc Runout

Courtesy of FORD MOTOR CO.