LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Cutaway 7.3 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 2055 (Noise, Vibration And Harshness -- F250-F550 Super Duty) >> Diagnostic Tests >> Noise, Vibration and Harshness (NVH) >> Customer Interview

Customer Interview

WARNING: This page is about a different car, the 2008 Ford Pickup, 2008 Ford F550 Super Duty, 2008 Ford F450 Super Duty, and 2008 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

The diagnostic process starts with the customer interview. The service advisor must obtain as much information as possible about the symptom and take a test drive with the customer. There are many ways a customer will describe NVH symptoms and this will help minimize confusion arising from descriptive language differences. It is important that the symptom is correctly interpreted and the customer descriptions are recorded. During the interview, complete the write-up job aid and ask the following questions:

Use the information gained from the customer to accurately begin the diagnostic process.