P2563 - Turbocharger Boost Control Position Sensor A Circuit Range/Performance
WARNING: This page is about a different car, the 2008 Ford Pickup, 2008 Ford F550 Super Duty, 2008 Ford F450 Super Duty, and 2008 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
P2563 - TURBOCHARGER BOOST CONTROL POSITION SENSOR A CIRCUIT RANGE/PERFORMANCE
| Description: | The powertrain control module (PCM) monitors the difference between the turbocharger actuator commanded duty cycle and the actual duty cycle. | |||
| Possible Causes: |
|
|||
| Diagnostic Aids: | A concern is indicated when the commanded duty cycle is less than the threshold value for the given engine speed and engine load for greater than 2.5 seconds. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory | |
| All | - | - | refer to PINPOINT TEST AK . | |