P2229 - Barometric Pressure Circuit High
WARNING: This page is about a different car, the 2008 Ford Pickup, 2008 Ford F550 Super Duty, 2008 Ford F450 Super Duty, and 2008 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
P2229 - BAROMETRIC PRESSURE CIRCUIT HIGH
| Description: | Checks whether the signal from the BARO pressure sensor is above the maximum threshold. | |||
| Possible Causes: |
|
|||
| Diagnostic Aids: | When the BARO signal is greater than 4.36 V for more than 100 ms, a concern is indicated. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory | |
| All | Clear the DTCs. Repeat the self-test. If the DTC is retrieved again, install a new PCM. Refer toFLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) . | |||