P1703 - Brake Switch Out Of Self-Test Range
WARNING: This page is about a different car, the 2008 Ford Pickup, 2008 Ford F550 Super Duty, 2008 Ford F450 Super Duty, and 2008 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
P1703 - BRAKE SWITCH OUT OF SELF-TEST RANGE
| Description: | Indicates that during the key on engine off (KOEO) self-test, the brake pedal position (BPP) signal was high, or during the key on engine running (KOER) self-test, the BPP signal did not cycle high and low. | |||
| Possible Causes: |
|
|||
| Diagnostic Aids: | Check for correct function of the stoplamp. Using the scan tool, check the BPP PID. The stoplamp and PID should toggle on and off with the brake pedal applied and released. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory | |
| All | refer to PINPOINT TEST AI . | |||