LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Cutaway 7.3 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 2050 (Engine Controls - Diagnostic Subroutines - 6.4L 99R Diesel -- F250-F550 Super Duty) >> Diagnostic Trouble Code (DTC) Charts and Descriptions >> P162E - Internal Control Module PTO Performance

P162E - Internal Control Module PTO Performance

WARNING: This page is about a different car, the 2008 Ford Pickup, 2008 Ford F550 Super Duty, 2008 Ford F450 Super Duty, and 2008 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
P162E - INTERNAL CONTROL MODULE PTO PERFORMANCE

Description:  The DTC is set when the activation conditions of the power take off (PTO) are not met and the PTO is still being enabled by the PCM to run.
Possible Causes: 
  • APP circuit
  • BPP circuit
  • BPA circuit
  • Damaged PCM
Diagnostic Aids:  Check for APP, BPP or BPA DTCs and diagnose those DTCs first. If other DTCs are not present, reprogram or update the calibration. Clear the DTC, repeat the self-test. If the DTC is retrieved again, install a new PCM. Refer to FLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) .
Application    Key On Engine Off  Key On Engine Running  Continuous Memory 
All   Refer to the Description, Possible Causes and Diagnostic Aids for the DTC.