P1336 - Crankshaft/Camshaft Sensor Range/Performance
WARNING: This page is about a different car, the 2008 Ford Pickup, 2008 Ford F550 Super Duty, 2008 Ford F450 Super Duty, and 2008 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
P1336 - CRANKSHAFT/CAMSHAFT SENSOR RANGE/PERFORMANCE
| Description: | The DTC sets when the input signal to the powertrain control module (PCM) from the crankshaft position (CKP) sensor is erratic. | |||
| Possible Causes: |
|
|||
| Diagnostic Aids: | Check the harness for intermittent concerns, routing, alterations, incorrect shielding, or electrical interference from other systems. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory | |
| All | - | refer to PINPOINT TEST D . | refer to PINPOINT TEST D . | |