P1000 - On-Board Diagnostic (OBD) Systems Readiness Test Not Complete
WARNING: This page is about a different car, the 2008 Ford Pickup, 2008 Ford F550 Super Duty, 2008 Ford F450 Super Duty, and 2008 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
P1000 - ON-BOARD DIAGNOSTIC (OBD) SYSTEMS READINESS TEST NOT COMPLETE
| Description: | The OBD monitors are carried out during the OBD drive cycle. This DTC is stored in continuous memory if any of the OBD monitors do not carry out their full diagnostic check. | |||
| Possible Causes: |
|
|||
| Diagnostic Aids: | The DTC does not need to be cleared from the powertrain control module (PCM) except to pass an inspection/maintenance test. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory | |
| All | refer to PINPOINT TEST AC . | |||