P061B - Internal Control Module Torque Calculation Performance
WARNING: This page is about a different car, the 2008 Ford Pickup, 2008 Ford F550 Super Duty, 2008 Ford F450 Super Duty, and 2008 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
P061B - INTERNAL CONTROL MODULE TORQUE CALCULATION PERFORMANCE
| Description: | Indicates a calculation error occurred in the powertrain control module (PCM). | |||
| Possible Causes: |
|
|||
| Diagnostic Aids: | Check for sensor and circuit related DTCs. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory | |
| All | Reprogram or update the calibration. Check for other DTCs or drive symptoms for further action. Make sure to check for aftermarket performance products before installing a new PCM. If it is necessary to install a new PCM, refer toFLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) . | |||