LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Cutaway 7.3 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 2050 (Engine Controls - Diagnostic Subroutines - 6.4L 99R Diesel -- F250-F550 Super Duty) >> Diagnostic Trouble Code (DTC) Charts and Descriptions >> P0610 - Control Module Vehicle Options Error

P0610 - Control Module Vehicle Options Error

WARNING: This page is about a different car, the 2008 Ford Pickup, 2008 Ford F550 Super Duty, 2008 Ford F450 Super Duty, and 2008 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
P0610 - CONTROL MODULE VEHICLE OPTIONS ERROR

Description:  Indicates a powertrain control module (PCM) vehicle options error.
Possible Causes: 
  • Module reprogramming
  • Aftermarket performance products
  • Corrupted vehicle identification (VID) data
  • PCM
Diagnostic Aids:  This DTC sets when the PCM detects various VID data that is out of a specified acceptable range.
Application    Key On Engine Off  Key On Engine Running  Continuous Memory 
All   Reprogram or update the calibration. Check for other DTCs or drive symptoms for further action. Make sure to check for aftermarket performance products before installing a new PCM. If it is necessary to install a new PCM, refer toFLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) .
scientia non olet · About LEMON Manuals