P0603 - Internal Control Module Keep Alive Memory (KAM) Error
WARNING: This page is about a different car, the 2008 Ford Pickup, 2008 Ford F550 Super Duty, 2008 Ford F450 Super Duty, and 2008 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
P0603 - INTERNAL CONTROL MODULE KEEP ALIVE MEMORY (KAM) ERROR
| Description: | Indicates the powertrain control module (PCM) has experienced an internal memory concern. However, there are external items that can cause this DTC. | |||
| Possible Causes: |
|
|||
| Diagnostic Aids: | Reprogram or update the calibration. Check for other DTCs or drive symptoms for further action. Make sure to check for aftermarket performance products before installing a new PCM. If it is necessary to install a new PCM, refer toFLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) , Programming the VID Block for a Replacement PCM. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory | |
| All | refer to PINPOINT TEST Z . | |||