P0113 - Intake Air Temperature (IAT) Sensor 1 Circuit High
WARNING: This page is about a different car, the 2008 Ford Pickup, 2008 Ford F550 Super Duty, 2008 Ford F450 Super Duty, and 2008 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
P0113 - INTAKE AIR TEMPERATURE (IAT) SENSOR 1 CIRCUIT HIGH
| Description: | The powertrain control module (PCM) monitors the IAT sensor circuit through the comprehensive component monitor (CCM). If the IAT signal voltage is greater than the maximum calibrated limit, the test fails. | |||
| Possible Causes: |
|
|||
| Diagnostic Aids: | An IAT PID reading greater than 4.9 volts for greater that 50 ms indicates a concern is present. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory | |
| All | refer to PINPOINT TEST F . | |||