P0108 - Manifold Absolute Pressure (Map)/Barometric Pressure (BARO) Sensor High
WARNING: This page is about a different car, the 2008 Ford Pickup, 2008 Ford F550 Super Duty, 2008 Ford F450 Super Duty, and 2008 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
P0108 - MANIFOLD ABSOLUTE PRESSURE (MAP)/BAROMETRIC PRESSURE (BARO) SENSOR HIGH
| Description: | The MAP signal voltage is higher than a specified value indicating a short to power. | |||
| Possible Causes: |
|
|||
| Diagnostic Aids: | If the MAP sensor operating voltage is greater than 4.9 volts for more than 2.5 seconds, a concern is indicated. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory | |
| All | refer to PINPOINT TEST E . | |||