LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Cutaway 7.3 F >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Power Brake Actuation -- Brake Booster >> Removal And Installation >> Pump - Vacuum, 7.3L Diesel >> Removal and Installation

Removal and Installation

  1. Remove the drive belt. For additional information, refer to ACCESSORY DRIVE .
  2. Disconnect the vacuum pump hose.
    Fig 1: Disconnecting Vacuum Pump Hose
    G01439602Courtesy of FORD MOTOR CO.
  3. Remove the bolts and remove the vacuum pump.
    Fig 2: Removing Bolts (Vacuum Pump)
    G01439603Courtesy of FORD MOTOR CO.
  4. To install, reverse the removal procedure.
    Fig 3: Installing Bolts (Vacuum Pump)
    G01439604Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals