Diagnostic Aids
Perform this test only when directed by QUICK TEST. DTC P1450 will be set in PCM when EVAP running loss monitor detects more than -7.2 in. H2 O (-1.79 kPa) with engine running (but not at idle) for more than 30 seconds.
Perform this test only when directed by QUICK TEST. DTC P1450 will be set in PCM when EVAP running loss monitor detects more than -7.2 in. H2 O (-1.79 kPa) with engine running (but not at idle) for more than 30 seconds.