LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> ZX2 Automatic >> Repair and Diagnosis (Single Page) >> Engine Performance >> Testing & Diagnosis >> Engine Controls - Self-Diagnostics Introduction- EEC-V - Gasoline & NGV >> System Tests (Evaporative Emission) >> Canister Vent Solenoid Closing Procedure

Canister Vent Solenoid Closing Procedure

Connect scan tool to Data Link Connector (DLC) and select OUTPUT TEST MODE  under ADDITIONAL SYSTEM FUNCTIONS. Turn ignition switch to ON position. Select FTP and FTP V PID from PID/DATA MONITOR & RECORD menu. Select ALL OFF mode. Close canister vent solenoid by pressing START button on scan tool.

scientia non olet · About LEMON Manuals