LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> ZX2 Automatic >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Removal And Installation >> Thermostat Housing - 2.0L Zetec-E (Zetec) >> Installation

Thermostat Housing - 2.0L Zetec-E (Zetec): Installation

    NOTE: Install a new O - ring seal.
    Fig 1: Installing Thermostat Housing Bolts
    G03433078Courtesy of FORD MOTOR CO.
  1. To install, reverse the removal procedure.
  2. Fill the cooling system. For additional information, refer to COOLING SYSTEM DRAINING, FILLING AND BLEEDING .
scientia non olet · About LEMON Manuals