LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Windstar SEL >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Wheel Cylinders >> Removal & Installation

Removal & Installation

  1. Remove the brake shoes and linings. See BRAKE SHOES  .
  2. Disconnect the brake line fitting. See Fig 1 .
  3. Remove the two rear wheel cylinder bolts and remove the wheel cylinder.
  4. To install, reverse removal procedure. Adjust brakes, and bleed hydraulic system. See BLEEDING BRAKE SYSTEM  .
Fig 1: Removing/Installing Wheel Cylinder
G00310869Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals