Pinpoint Test V: One Turn Signal Lamp Is Never On - RR Turn Lamp

NOTE: The ignition switch must be cycled from OFF to RUN to enable the SSP feature.

Fig 1: Pinpoint Test V: One Turn Signal Lamp Is Never On - RR Turn Lamp (V1-V2)

Courtesy of FORD MOTOR CO.

Fig 2: Pinpoint Test V: One Turn Signal Lamp Is Never On - RR Turn Lamp (V3-V4)

Courtesy of FORD MOTOR CO.

Fig 3: Pinpoint Test V: One Turn Signal Lamp Is Never On - RR Turn Lamp (V5-V6)

Courtesy of FORD MOTOR CO.