LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Taurus SES, 3.0 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 836 (Engine 4.6 & 5.4L) >> In-Vehicle Repair >> Crankshaft Front Seal >> Removal

Crankshaft Front Seal: Removal

WARNING: This page is about a different car, the 2004 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the crankshaft pulley. For additional information, refer to CRANKSHAFT PULLEY .
  2. Using the special tool, remove the crankshaft front seal.
    Fig 1: Removing Crankshaft Front Seal Using Special Tool
    G02762823Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals