LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Taurus SES, 3.0 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 766 (Brake System) >> Removal And Installation >> Rear Disc Brake >> Item 8: Brake Disc Inspection Note

Item 8: Brake Disc Inspection Note

WARNING: This page is about a different car, the 2004 Mercury Monterey and 2004 Ford Freestar. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: If machining is necessary use a hub-mount brake lathe to machine the rear brake disc. For additional information, refer to BRAKE DISC MACHINING .
  1. Measure the rear brake disc and resurface as necessary. Install a new rear brake disc if beyond specification.
scientia non olet · About LEMON Manuals