Removal and Installation
WARNING: This page is about a different car, the 2003 Mercury Sable and 2003 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the rear window washer reservoir.
Refer to REAR WINDOW WASHER RESERVOIR .
- Remove the rear window washer pump from the reservoir by pulling straight out.
- Remove the one-piece window washer pump seal from the pump and inspect for damage or foreign material.
- Clean or install a new seal as necessary.
- To install, reverse the removal procedure.
- Lubricate the washer pump seal with soapy solution before assembly.