LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Taurus SES, 3.0 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 494 (Handles, Locks, Latches And Entry Systems) >> Removal And Installation >> Keyless Entry Keypad >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2003 Mercury Sable and 2003 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the driver side exterior front door handle. For additional information, refer to EXTERIOR FRONT DOOR HANDLE .
  2. Remove the three keyless entry keypad nuts.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals