Removal and Installation
WARNING: This page is about a different car, the 2003 Mercury Sable and 2003 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the front door trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .
- Remove the watershield.
- Remove the interior weather strip.
- Remove the two rivets retaining the front door window glass to the front door window regulator assembly.
- Tilt the front door window glass forward and remove the glass.
- To install, reverse the removal procedure.
CAUTION:
Prior to removing the rivet center pins, place suitable support between the door outer panel and the glass to stabilize the glass.
NOTE:
Lower the window to access the rivets.