Removal and Installation

WARNING: This page is about a different car, the 2003 Mercury Sable and 2003 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the battery ground cable. For additional information, refer to BATTERY, MOUNTING AND CABLES .
Remove the screws and position the CD changer aside.

Fig 1: Removing Screws And Positioning CD Changer Aside
Courtesy of FORD MOTOR CO.
Disconnect the electrical connector and remove the CD changer.

Fig 2: Disconnecting Electrical Connector And Removing CD Changer
Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.